The Type F-50TB Roof Access Hatch is an ideal solution for applications that require a larger access than the standard opening. At 1220x1220mm, the F-50TB is commonly used where removal or installation of small pieces of equipment is done via the roof.
BILCO Roof Access Hatches feature a thermally broken frame and cover design that minimizes heat transfer between interior and exterior metal surfaces. The result is a product that provides superior energy efficiency and resists harmful condensation.
Tested and approved to BS EN standards for weathertightness, sound rating and security.
Engineered with compression spring operators to provide smooth, easy, one-hand operation, regardless of size. BILCO hatches meet the requirements of Manual Handling Regulations.
Automatic hold-open arm locks the cover in the open position to ensure safe egress. Grip handle allows for easy, one-hand release and closing.
Overlapping cover design, fully welded corners on cover and curb, closed-cell EPDM rubber gasket, and fully insulated cover and curb ensure weathertightness and energy efficiency.
Constructed with corrosion-resistant materials to provide many years of trouble-free, dependable service.
Heavy gauge construction and positive latching mechanism maintain building security.
Curb features the Bil-Clip® Flashing System, an innovative method to quickly and easily secure single-ply roofing material to BILCO roof products.
Available in many sizes and curb configurations to satisfy any access requirement or installation.
|U-VALUE||0.278 W/m²K (homogeneous)|
|1.39 W/m²K (Developed Area)|
|BS EN 12207:2000||Air Permeability 4.83 m³/hour/m² at 600Pa|
|BS EN 12208:2000||Water Tightness Class 9A|
|BS EN 12210:2000||Wind Resistance Class E2400|
|BS EN 1991-1||Snow Load 1200Pa for 1 hour|
|BS 8200||Impact Resistance Pass|
|BS EN ISO 140||Acoustic 25dB|
|BS EN 1627-1630||Security Pass|
|WIND SPEED||With Open Cover 30 m/s|
|MATERIAL||Cover and frame are 2.3mm Aluminium|
|COVER||Brake-formed, hollow-metal design with 75mm concealed polyisocyanurate insulation with a 127 mm beaded, overlapping flange, fully welded at corners, and internally reinforced for 195 kg/m² live load.|
|CURB||102mm in height formed with a 117mm flange and 38mm apron, fully welded at corners. Stainless Steel anchor clips are included. BILCO recommended maximum upstand width is 65mm. 50mm polyisocyanurate curb insulation.|
|GASKET||Extruded EPDM rubber gasket permanently adhered to cover. Air leakage performance 4.83m³/hr/m² @ 600Pa Tested to BS EN 12207: 2000|
|HINGES||Heavy-duty pintle hinges with 9.5mm Stainless Steel Type 316 hinge pins.|
|LATCH||Slam latch with interior and exterior turn handles and padlock hasps.|
|LIFT ASSISTANCE||Compression spring operators enclosed in telescopic tubes. Automatic hold-open arm with grip handle release.|
|FINISH||Mill finish Aluminium|
|HARDWARE||Engineered composite compression spring tubes with steel compression springs packed in grease. Stainless Steel Type 316 hinges. All other hardware is zinc plated/chromate sealed.|
|NOTES||National Physical Laboratory U-Value test report available upon request. Patent pending.|